Available now
Bosch washer showing an error code, not draining, leaking or not spinning? Our trained technicians specialise in German-engineered Bosch machines — Serie 4, Serie 6, Serie 8, Logixx, Maxx, with EcoSilence Drive, i-DOS and Home Connect systems. Suitable parts.
Free inspection Calls answered 24/7 Independent repair service
Your Bosch washer showing an F or E code on the display? Here are the most common ones — and what they actually mean. Call us and we'll fix the cause, not just the code.
The door isn't sealing properly or the door lock isn't engaging, so the washer refuses to start.
Water isn't heating, or heating unevenly, so the cycle stops.
The washer waits for water and doesn't get it in the expected time, so it stops and flashes F20.
The motor isn't running or stops suddenly, halting the cycle.
Water stays in the drum after the cycle and the washer stops, flashing F23.
The control board isn't communicating with the motor or display board.
The washer can't lock the door, or release it after the cycle.
The NTC temperature sensor isn't working or reads incorrectly.
E01 relates to a door lock issue, and E02 points to a water inlet problem.
E03 (drain), E05 (temperature sensor), E06 (motor), E07 (heating), and any other E code on your Bosch display — we test each one properly and find the root cause.
Didn't find your error code? Call 054 400 6384 — tell us the code and we'll identify the cause in minutes.
Pick the symptom closest to your situation. Each one links to a dedicated page with detailed causes and repair information.
Standing water in the drum after the cycle? We clear the pump filter, check the hose and repair the pump — same visit.
Learn moreWater on the laundry floor? We trace the source — door gasket, inlet valve, hoses or pump — and seal it properly.
Learn moreClothes coming out soaking? We repair the door lock, worn belt or motor — and restore full spin power.
Learn moreBanging, grinding or squealing? We replace worn bearings and shock absorbers and remove foreign objects causing the noise.
Learn moreNo response when you press power? We check the supply, control board, door lock and wiring — and get it running again.
Learn moreWasher waiting for water and refusing to start? We clean the valve filter, check pressure and repair the inlet valve.
Learn moreMusty odour from the drum? We deep-clean filters, hoses and the drum — and show you how to prevent it coming back.
Learn moreWash comes out cold and water never warms? Heating element or temperature sensor — we test and replace with Suitable parts.
Learn moreDoor stuck after the cycle? Door lock or control board — we open it safely without damaging the door, then fix the cause.
Learn moreWhether your washer is a top-of-the-line German Serie 8 or a workhorse Logixx, our technicians are trained on that specific platform.
Model not listed? Call us — we repair every Bosch washing machine sold in Saudi Arabia.
Because a Bosch is German-engineered with a brushless EcoSilence Drive motor and advanced electronics. We've been working on them daily.
No waiting rooms, no hauling your machine across town, no surprise invoices.
Tell us your Bosch model and the problem — or the F/E code you're seeing.
Our technician inspects the washer at your home, identifies the fault and quotes before starting any work.
Most repairs are completed on the spot with Suitable parts.
Our technicians cover Dammam, Al Khobar and Dhahran.
Everything customers in Dammam ask us before booking a Bosch repair.
Error F16/F17 on a Bosch washer means the door isn't closing properly, or the door lock is faulty. Common causes: clothing trapped in the door, a failed door lock, or a control board fault. We fix it.
Error F18/F19 means a fault in the heating element or temperature sensor. The washer may not heat water, or heat it unevenly. We replace the element or sensor with Suitable parts.
Error F21/F22 means a fault in the motor or the EcoSilence Drive system. Causes include a worn drive belt, weak capacitor, or a faulty inverter motor control board.
Error F23 means the washer isn't draining. The cause is usually a clogged drain pump filter, a kinked drain hose, or a failed drain pump. See all Bosch error codes.
Yes. We repair all Bosch models: Serie 4, Serie 6, Serie 8, Logixx, Maxx, Avantixx, Exclusiv, Ascenta, plus the i-DOS and Home Connect models.
Free diagnosis.